Baseus power bank Power Starter Jump Starter booster 12000 mAh 12 V (1000 A / 600 A)
Do you need a reliable jump starter which can make you independent of roadside assistance specialists and let you start your cold car engine on your own. A weak car battery does not need to be an issue if you have your own Baseus jump starter. Parameters of this device are perfect, up to 1000 A of peak current. It is strong enough to let you start your car up to 50 times per charging! An efficient, safe, handy and user-friendly starter is a must-have in every garage.
Rated capacity: 7900mAh
USB output: 5V-2.4A[Max]
Type-C output: 5V-3A
Initial voltage: 12V
Starting current: 600A
Peak current: 1000A
Content of the set
1 x jump starter
1 x cable type-C
1 x Smart Starter clamp
1 x operating manual in Chinese and English
Very high peak current of 1000 A and starting current of 600 A
You can start the car up to 50 times on full charging
The built-in display which informs you about battery level in jump starter
Highly efficient, polymer secondary cells are resistant to very low and high temperatures
Very low power consumption in a standby mode. It can keep up to 85% of energy a year after last full charging, if not used
Built-in protection preventing damage of devices connected
Thanks to built-in LED lights, it may be used as a traditional flashlight
The set includes crocodile clips used to connect to the battery, and USB – USB-C cable
The peak current of 1000 A leads to an instant car start-up
Adapted to many vehicles with 12-V batteries
Remains fully operational at very low and high temperatures
Up to 50 start-ups per charging
Digital screen with data on battery level
The set includes crocodile clips, USB -USB-C cable
Power Bank for mobile phone charging
9 degrees of security.
Security is a priority. For this reason the following built-in functions of Baseus model assure stable and failure-free use of the device:
Top-quality lithium-polymer batteries
Protection against overcharging
Protection against electric shock
Protection against short-circuit
Protection against excessive discharge
Protection against reversed connection
Protection against overheating
Due to size and technical parameters, the device may be taken on the plane.
How to correctly start the car with a jump starter 3 steps:
Connect. Insert smart ignition clamps to EC5 interface of the starter. flashing red and green lights inform you about connection status.
Clamp. Raise your car hood. Connect wires. positive (red) with battery terminal marked with plus and negative (black) on negative pole in the battery.
Start the car. Go back to the vehicle and start it. Before you start driving, remove the starter from the car battery.
Starting voltage 12V
Starting current: 600A
Peak Current: 1000A
Suitable for: 12V 6.0L gasoline car / 12V 3.5L diesel car