Easy Installation: Install this smoke alarm in only minutes with the provided screws or adhesive tape, then add it to the app to get started.
24 Hour Real-Time Track protection: You will receive a real-time notification on your smartphone when an alarm is triggered or a status is changed, which makes your life more convenient.
Faster Response time to danger with loud 85 DB Alarm: Upgraded photoelectric sensor significantly increases the alarm’s sensitivity for a faster response time while minimizing false alarms; 85 dB alarm is loud enough to alert all members in the household.
Premium Material: The smoke detector is housed in a flame-retardant high-temperature resistant ABS material for enhanced quality and durability.
Silencing and testing
Silence: In the alarm state, press the “test” button to silence the buzzer, only the LED indicator flashes.
Test: In normal state, long press the “test” button for 2s to trigger the sound and light alarm, the alarm message is sent to the mobile APP.
WiFi and network configuration
Install the tuya Smart app on your smartphone the first time you use the detector.
Make sure your smartphone is connected to WiFi.
A) Launch the app, click “Add Device” — “Security Sensor” — “Sensor (WiFi) ‘/” Smoke (WiFi) “.
B) Press and hold the “Test” button for 5s until the LED flashes with a short beep of “di” (press and hold the button within 20 seconds after charging the battery to enter WiFi setup mode).
C) Click “OK” in the APP — enter the password for WiFi, click “OK”, the detector enters setup mode which lasts for 60s max.
A LONG “di” beep with LED indicator on for 10s means the WiFi setup is complete. When the WiFi setup fails, the detector exits setup mode with a short ‘Di Di’ beep.
The WiFi configuration is based on the 3 steps above.
WiFi network status: When the LED indicator is on for 10s after charging the battery, it means the detector is successfully connected to WiFi.
Reviews
There are no reviews yet.